The first is to adjust the production line of the gear processing department. The HW spindle gear production line of the gear processing department has been increased from 6 to 7. At the same time, the intermediate shaft 1 line of the shaft processing department has been adjusted to the main shaft gear processing line. Each of the double intermediate shaft HW15 / 19 spindle gears Class production capacity reaches 150 sets.
The second is to locally adjust the processing line of HW15 / 19/19712 series input shaft parts to increase the production capacity of the input shaft to reach 150 sets per shift, to achieve the balance between the production capacity of HW products and the production capacity of gears. Single intermediate shaft Gearbox shaft parts can reach 70 sets per shift.
The third is to integrate the shell production line, adjust the original shell 4 line and the shell 1 line to the HW15 / 19 front shell production line, adjust the original finished product to a blank outsourcing, achieve all self-made front shells, and improve capacity utilization.
Through the adjustment, the core equipment is implemented in a two-shift system to form a daily production capacity of 200 HW dual-axle gearboxes, a daily output capacity of DC single intermediate-shaft gearboxes of 140 units, a daily output capacity of 100 sets of mutual-supply parts, and a daily output capacity of 500 single-axle gearbox accessories. In order to complete the company's own assembly tasks and gradually increase the share of mutual supply.